Innovations of Manitou Group at Bauma Munich

Manitou Group, a world reference in the handling, aerial work platform and earth moving sectors, presents a wide range of solutions at the world's largest construction trade fair. The group is asserting its ambitions in terms of the energy transition, with an expanded electric range and a new hydrogen-powered prototype. The group is also previewing a new high-lift rotating telehandler.

Manitou Group unveils two new Manitou MT 1440e and MT 1840e electric telehandlers. Powered by a lithium-ion battery, these models are designed to meet the most demanding requirements and are distinguished by their extremely high performance. In fact, the 63 kWh battery powers the machine for the entire work day.

Continuing its commitment to decarbonization, Manitou Group presents a new concept in hydrogen-powered rotating telehandlers. This MRT 2260 H2 prototype, which is part of a low-carbon trajectory, bears witness to our active role in the development of hydrogen-powered electric machines. The special feature of this model is that it is powered by hydrogen via a fuel cell, a technology that guarantees zero-emission operation. This second prototype, based on an electric configuration, offers a lifting height of 22 meters and a load capacity of 6 tonnes.

The group presents a new model of Manitou MRT 4070 rotating telehandler. This is the highest height offered by the VISION+ range of rotaries, with a height capacity of 40 meters and a load capacity of 7 tonnes. The outreach is also substantial, reaching up to 27 meters. Powered by a 211 hp engine, this model is equipped with a CVT transmission. The MRT 4070 is ideal for a wide range of applications, including industrial structure construction, maintenance and renovation, masonry, roofing, and timber and steel frame installation.

The VJR range of vertical access platforms (8m and 10m working heights) has had its control panel redesigned to optimize ergonomics and facilitate use in confined spaces. Its electric engine, suitable for stabilized indoor and outdoor environments, reduces noise and environmental pollution. Beyond its operational performance, the VJR incorporates cutting-edge technologies to enhance the user experience.

Manitou strengthens its range of electric recharging solutions with a new external fast charger (30 kWh), designed for maximum efficiency and extended compatibility with the MT range (telehandlers) and the ME Lift electric ranges (forklifts), guaranteeing in particular a 60% recharge in less than an hour. This loader has been designed for easy transport and installation, thanks to its integrated lifting slings and fork pockets. This loader has been designed to withstand off-road conditions, for ease of use on construction sites and extended service life.

GEHL fans can look forward to a selection of two AL 330 & AL 350 articulated loaders, two track loaders and the R135 wheel loader, renowned for their robustness and versatility. GEHL products offer high performance and easy maintenance. Ideal for demanding applications on construction sites, these skid steer loaders benefit from a wide choice of attachments such as crushers, graders or concrete mixing buckets.

Also presented is the innovative track loader solution dedicated to rail operations and awarded the Supplier Innovation Prize by Deutsche Bahn in 2024. This represents an optimal alternative to conventional underground cable construction and is faster, more efficient and more resource-saving. These skid steer loaders emit fewer emissions than traditional machines used for this type of application, reducing the environmental impact of this activity. A ULM offer with trailer is available through the Manitou dealer network in Germany, Austria and Switzerland. Combined with this ultra-compact telehandler, this sturdy aluminum K50 ball hitch trailer is equipped with access ramps and comes with a box that can contain customized tie-down equipment. This offer makes it easy to transport the ULM from job site to job site and increases productivity.

The MHT 790 Stage V Mining model is a versatile telehandler capable of handling a wide range of attachments, including tire clamps and jacks, to service other mining equipment. This enables the operator to perform a variety of tasks with a single machine, boosting productivity and profitability. Manitou Group has designed the new SC 28 hydraulic breaker as part of its commitment to offer a wide range of attachments. Compact and robust, it is ideal for work in difficult underground environments.

Manitou Group's REMAN offer consists of a range of remanufactured spare parts, contributing to a virtuous circular economy. Used parts such as engines, gearboxes, and hydraulic pumps are refurbished with new, original components. The process includes replacing the faulty part, returning it to Manitou Group, diagnosing it, refurbishing it with original components, and making it available as a certified REMAN part.

To provide the best possible customer experience, Manitou Group offers a 3-in-1 package called Easy Care, comprising connected services, financing and extended warranty. In fact, the Group connects all its new ranges as standard, to provide remote access to machine usage information with varying levels of criticality: real-time monitoring, maintenance follow-up, use optimization. This service is particularly appreciated by fleet managers such as rental companies. Manitou Group expands its range of attachments with the PRGSA 750 pruning grapple saw. Designed to optimize forestry work, it enables trees to be pruned in complete safety. With a cutting capacity of up to 750 mm in diameter and a 360° rotation system, this attachment adapts perfectly to each tree, and its powerful clamp ensures a firm grip on harvested trunks and branches.

Manitou Group is also exhibiting a solution designed to optimize the safe handling of cylindrical objects. With a maximum load capacity of 14 t, and a pipe diameter of up to 1 meter, this equipment guarantees stability and precision thanks to its mobile grapple with hydraulic teeth.